Aqua Robe ( Aqua_Robe )

ID 15026

Prix d'achat: 20 zeny Prix de vente: 10 zeny Poids: 50 Emplacements: Non spécifié

Type: Armure/Vêtement/Bottes/Coiffure/Accessoire. Sous-type: Non spécifié Genre: Les deux Lieux: Armure

Attaque: Non spécifié Attaque magique: Non spécifié Portée: Non spécifié Défense: 40

Niveau d'arme: Non spécifié Niveau d'armure: 1 Niveau d'équipement min.: 100 Niveau d'équipement max.: Non spécifié

Affûtage: 1 Améliorable: Non spécifié Élément: Eau Classes: Classes Quatrièmes., Toutes les classes Troisièmes.

Vestimenta encantada com o poder da água.
--------------------------
Conjuração variável de [Nevasca] -3 segundos.
--------------------------
INT +1.
INT base 120 ou mais:
INT +1 adicional.
--------------------------
Tipo: Armadura
DEF: 40 DEFM: 10
Peso: 50
Propriedade: Água
Nível necessário: 100
Classes: Arcanos e evoluções

Sebuah jubah biru elegan yang mempunyai kekuatan air.
INT + 1, MDEF + 10.
Mengurangi variable cast time dari Storm Gust sebesar 3 detik, INT + 1 bila INT asli 120 atau lebih.
Jenis : Armor Def : 40
Berat : 50 Elemen : Air
Level Persyaratan : 100
Profesi : Warlock

An elegant blue robe imbued with the power of water.
Class: Armor
Defense: 40
Property: Water
Weight: 50
Requires Level: 100
Usable By: Warlock
Int + 1
Mdef + 10
Reduces the variable casting time of Storm Gust by 3 seconds.
If the user's base Int is 120 or higher, additional Int + 1.

Set Bonus
Aqua Staff [2]
Aqua Robe
Aqua Shoes [1]
Aqua Orb [1]
Increases the damage of Water property magical attacks on targets by 40%.
Reduces the damage of Wind property magical attacks on targets by 30%.
Increases damage taken from Wind property attacks by 50%.

Set Bonus
Empowered Aqua Staff [1]
Aqua Robe
Aqua Shoes [1]
Aqua Orb [1]
Increases the damage of Water property magical attacks on targets by 60%.
Reduces the damage of Wind property magical attacks on targets by 60%.
Increases damage taken from Wind property attacks by 50%.

An elegant blue robe imbued with power of water.
INT +1.
MDEF + 10.
Decreases the variable casting time of[Storm Gust] by 3 seconds.
INT +1 when base INT is 120 or more.
-------------
[Aqua Set 1]
Aqua Robe15026
Aqua Shoes2468
Aqua Orb2860
Aqua Staff2008
Water magic damage +40%.
Wind magic damage -30%.
Resistance to Wind attacks -50%.
-------------
[Aqua Set 2]
Aqua Robe15026
Aqua Shoes2468
Aqua Orb2860
Empowered Aqua Staff2012
Water magic damage +60%%.
Wind magic damage -60%%.
Resistance to Wind attacks -50%%.
-------------
Type: Armor Defense: 40
Weight: 50 Property: Water
Required Level: 100
Job: Warlock

Sorcier

Snowier (0.05%)

Solid Snowier (0.25%)

Drapeaux

Peut-il être ajouté à une boutique d'achat de joueur ?	Non
Invoque un monstre ?	Non
Fait partie d'un conteneur ?	Non
Possède une pile unique ?	Non
Se lie à l'équipement ?	Non
Annonce le drop ?	Non
Est consommé à l'utilisation ?	Oui
A un effet au sol ?	Non

Empilement

Non spécifié

Utilisation

Non spécifié

Commerce

Remplacer	Non spécifié
Peut être jeté ?	Oui
Peut être échangé ?	Oui
Peut être échangé avec le partenaire ?	Oui
Peut être vendu à un PNJ ?	Oui
Peut être placé dans le chariot ?	Oui
Peut être placé dans le stockage ?	Oui
Peut être placé dans le stockage de guilde ?	Oui
Peut être envoyé par courrier ?	Oui
Peut être mis aux enchères ?	Oui

Délai

Non spécifié

bonus bDefEle,Ele_Water;
bonus bMdef,10;
bonus bInt,1;
bonus2 bSkillVariableCast,"WZ_STORMGUST",-3000;
if (readparam(bInt)>=120) {
   bonus bInt,1;
}

Références du Script

bDefEle Bonus d’Objet

bDefEle

Signature:

bonus bDefEle,e;

Description:

Gives the player's defense element e

bMdef Bonus d’Objet

bMdef

Signature:

bonus bMdef,n;

Description:

Equipment MDEF + n

bInt Bonus d’Objet

bInt

Signature:

bonus bInt,n;

Description:

INT + n

bSkillVariableCast Bonus d’Objet

bSkillVariableCast

Signature:

bonus2 bSkillVariableCast,sk,t;

Description:

Increases variable cast time of skill sk by t milliseconds

if Commande

if

Signature:

if (<condition>) <statement>;

Description:

This is the basic conditional statement command, and just about the only one available in this scripting language. The condition can be any expression. All expressions resulting in a non-zero value will be considered True, including negative values. All expressions resulting in a zero are false. If the expression results in True, the statement will be executed. If it isn't true, nothing happens and we move on to the next line of the script. For more information on conditional operators see the operators section above. bothering to store it in a specific variable: More examples of using the 'if' command in the real world: Example 1: Example 2: Notice that examples 1 and 2 have the same effect. Example 3: Example 4: Example 5: See 'strcharinfo' for an explanation of what this function does. Example 6: Using complex conditions. The script engine also supports nested 'if' statements: If the condition isn't met, it'll do the action following the 'else'. We can also group several actions depending on a condition: Remember that if you plan to do several actions upon the condition being false, and you forget to use the curly braces (the { } ), the second action will be executed regardless the output of the condition, unless of course, you stop the execution of the script if the condition is true (that is, in the first grouping using a return; , and end; or a close; ) Also, you can have multiple conditions nested or chained.

Exemple:

if (1)  mes "This will always print.";
if (0)  mes "And this will never print.";
if (5)  mes "This will also always print.";
if (-1) mes "Funny as it is, this will also print just fine.";
if (strcharinfo(0) == "Daniel Jackson") mes "It is true, you are Daniel!";
.@answer = 1;
input .@input;
if (.@input == .@answer)
close;
mes "Sorry, your answer is incorrect.";
close;
.@answer = 1;
input .@input;
if (.@input != .@answer)
mes "Sorry, your answer is incorrect.";
close;
.@count++;
mes "[Forgetful Man]";
if (.@count == 1) mes "This is the first time you have talked to me.";
if (.@count == 2) mes "This is the second time you have talked to me.";
if (.@count == 3) mes "This is the third time you have talked to me.";
if (.@count == 4) {
mes "This is the fourth time you have talked to me.";
mes "I think I am getting amnesia, I have forgotten about you...";
.@count = 0;
}
close;
mes "[Quest Person]";
if (countitem(512) < 1) {  // 512 is the item ID for Apple, found in db/item_db.yml
mes "Can you please bring me an apple?";
close;
}
mes "Oh, you brought an Apple!";
mes "I didn't want it, I just wanted to see one.";
close;
mes "[Person Checker]";
if ($@name$ == "") {  // global variable not yet set
mes "Please tell me someones name";
next;
input $@name$;
$@name2$ = strcharinfo(0);
mes "[Person Checker]";
mes "Thank you.";
close;
}
if ($@name$ == strcharinfo(0)) {  // player name matches $@name$
mes "You are the person that " + $@name2$ + " just mentioned.";
mes "Nice to meet you!";
// reset the global variables
$@name$ = "";
$@name2$ = "";
close;
}
mes "You are not the person that " + $name2$ + " mentioned.";
close;
mes "[Multiple Checks]";
if (@queststarted == 1 && countitem(512) >= 5) {
mes "Well done, you have started the quest and brought me 5 Apples.";
@queststarted = 0;
delitem 512,5;
close;
}
mes "Please bring me 5 apples.";
@queststarted = 1;
close;
if (<condition>)
dothis;
else
dothat;
if (<condition>) {
dothis1;
dothis2;
} else {
dothat1;
dothat2;
dothat3;
}
if (<condition 1>)
dothis;
else if (<condition 2>) {
dothat;
end;
} else
dothis;

readparam Commande

readparam

Signature:

readparam(<parameter number>{,"<character name>"})
readparam(<parameter number>{,<char_id>})

Description:

This function will return the specified stat of the invoking character, or, if a character name or character id is specified, of that player. The stat can either be a number or parameter name, defined in ''. Some example parameters: StatusPoint, BaseLevel, SkillPoint, Class, Upper, Zeny, Sex, Weight, MaxWeight, JobLevel, BaseExp, JobExp, NextBaseExp, NextJobExp, Hp, MaxHp, Sp, MaxSp, BaseJob, Karma, Manner, bVit, bDex, bAgi, bStr, bInt, bLuk, Ap, MaxAp All of these also behave as variables, but don't expect to be able to just 'set' them - some will not work for various internal reasons. Example 1: Using this particular information as a function call is not required. Typing this will return the same result: Example 2: You can also use this command to get stat values.

Exemple:

// Returns how many status points you haven't spent yet.
mes "Unused status points: " + readparam(9);
mes "Unused status points: " + StatusPoint;
if (readparam(bVit) > 77)
mes "Only people with over 77 Vit are reading this!";